Nano Switch(Z-PRL1-V01) advanced settings

中文 EN

Technical Information

Home > Technical Support > Technical Information

Nano Switch(Z-PRL1-V01) advanced settings

Date：2021-07-08 Click：415

Here is a selection of settings available to customize your Nano Switch.

#	Name	Size	Range	Description	Default
1	Led indicator load status	1	0~1	Led indicator load status. 0 = Disable 1 = Enable	1
2	Auto turn-off timer	2	0~65535	Automatically turns the switch off after this many minutes. When the switch is turned on a timer is started that is the duration of this setting. When the timer expires, the switch is turned off. 0 = timer disabled 1 ~ 65535 = (minutes) timer enabled	0
3	Auto turn-on timer	2	0~65535	Automatically turns the switch on after this many minutes. When the switch is turned off a timer is started that is the duration of this setting. When the timer expires, the switch is turned on. 0 = timer disabled 1 ~ 65535 = (minutes) timer enabled	0
4	Restores state after power failure	1	0~2	The state the switch should return to once power is restored after power failure. 0 = output off 1 = output on 2 = output the state after power	2
5	Enable or Disable Scene	1	0~1	Enable/disable to send scene notification command when the switches external action. 0 = disable 1 = enable	0
6	Enable or Disable Output control	1	0~2	Enable or Disable Output control (disable LOAD ONLY, ON/OFF works ). 0 = disable local button and External Switch control enable Z-Wave control (reports on hub ON/OFF ) 1 = enable local button and External Switch control enable Z-Wave control 2 = disable local button and External Switch control disable Z-Wave control (reports on hub ON/OFF )	1
7	External switch type	1	0~4	External switch type. 0 = toggle switch (device changes status when switch changes status) 1 = Momentary switch 2 = Switch ON ->always ON. Switch OFF->always OFF 3 = 3-way impulse control 4 = Garage Mode	2
8	Association reports	1	0~1	Association reports. 0 = Z-Wave control: Binary switch report Manual control: Basic report 1 = Z-Wave control: Binary switch report Manual control: Binary switch report	1
9	Relay type behavior	1	0~1	Relay type behavior. 0 = NO 1 = NC	0
10	Timer for relay seconds or minutes	1	1~2	Timer for relay seconds or minutes. 1 = Minute 2 = Second	1
11	Impulse time for par 7=3	1	2~200	Impulse time for par 7=3.	10

Name	Info	Parameter Number	Default Value(dec)	Max Value(dec)	Min Value(dec)	Size	ReadOnly	Format	Altering capability
Led indicator load status	Led indicator load status	0x01	1	1	0	1	No read-only	Unsigned integer	false
Auto turn-off timer	Auto turn-off timer	0x02	0	0xFFFF	0	2	No read-only	Unsigned integer	false
Auto turn-on timer	Auto turn-on timerr	0x03	0	0xFFFF	0	2	No read-only	Unsigned integer	false
Restores state after power failure	Restores state after power failure	0x04	2	2	0	1	No read-only	Unsigned integer	false
Enable or Disable Scene	Enable or Disable Scene	0x05	0	1	0	1	No read-only	Unsigned integer	false
Enable or Disable Output control	Enable or Disable Output control	0x06	1	2	0	1	No read-only	Unsigned integer	false
External switch type	External switch type	0x07	2	4	0	1	No read-only	Unsigned integer	false
Association reports	Association reports	0x08	1	1	0	1	No read-only	Unsigned integer	false
Relay type behavior	Relay type behavior	0x09	0	1	0	1	No read-only	Unsigned integer	false
Timer for relay seconds or minutes	Timer for relay seconds or minutes	0x0A	1	2	1	1	No read-only	Unsigned integer	false
Impulse time for par 7=3	Impulse time for par 7=3	0x0B	10	200	2	1	No read-only	Unsigned integer	false